Bespoke Contract Furniture
Custom furniture for hospitality, without the chase.
One supplier instead of twelve. Send us what you have and we will price it.
Factory direct to New York · Miami · Madrid · Tenerife · Dubai · Riyadh · Bahrain · Kuwait · Mumbai · Hong Kong · Bali
Shipping
International shipping, delivered to your door.*
Custom furniture takes its time whether it is made down the road or on the other side of the world. What we have tuned is everything around it, so the quality, the cost and the date all land where they should.
* Door delivery in the UAE and the United States. Everywhere else we deliver to the port nearest you and work with your agent on the last leg.
We discharge at the port nearest your site, then hand over to your agent.
Dining chairs
- Per piece, assembled
- 0.18–0.34 m³
- Per 40ft HC
- 130–260
Solid teak, mortise and tenon. Outdoor foam, quick dry. Solution dyed outdoor fabric.
Testing available to EN 581-1 · EN 581-2 · EN 16139 · EN 12520
Lounge chairs
- Per piece, assembled
- 0.45–0.76 m³
- Per 40ft HC
- 60–100
Solid teak frame. Outdoor foam, quick dry. Solution dyed outdoor fabric.
Testing available to EN 581-1 · EN 581-2 · EN 16139 · EN 12520
Sofas
- Per piece, assembled
- 1.2–2.1 m³
- Per 40ft HC
- 20–40
Solid teak frame. Outdoor foam, quick dry. Solution dyed outdoor fabric.
Testing available to EN 581-1 · EN 581-2 · EN 16139 · EN 12520
Daybeds
- Per piece, assembled
- 1.5–2.6 m³
- Per 40ft HC
- 17–30
Solid teak plinth. Outdoor foam, quick dry. Solution dyed outdoor fabric.
Testing available to EN 581-1 · EN 581-2
Canopies
- Per piece, crated
- 0.66–1.3 m³
- Per 40ft HC
- 35–70
Solid teak post and beam. Posts and rails bundled, roof and curtains folded, fixings bagged.
Testing available to EN 581-1
Tables
- Per piece, crated
- 0.42–1.1 m³
- Per 40ft HC
- 45–110
Solid teak top and base. Top crated flat, base bundled with its fixings.
Testing available to EN 581-3 · EN 15372
Planters
- Per piece, assembled
- 0.09–0.54 m³
- Per 40ft HC
- 85–500
Terracotta, hand thrown and whitewashed. Crated individually on corner blocks.
Lamps
- Per piece, assembled
- 0.09–0.31 m³
- Per 40ft HC
- 150–550
Turned teak cap, hand woven rattan shade. Shades nest inside one another.
Lanterns
- Per piece, crated
- 0.02–0.10 m³
- Per 40ft HC
- 450–2100
Solid teak frame with glass panes. Crated in threes, glass interleaved.
Swipe to see the full load
Where our products reach.
In orange, the projects we have shipped by the container. In grey, cities our smaller pieces already reach through retail and online sales. Point at any dot for the city.
We deliver to the port nearest you, then work with your local agent on the import documentation and the last leg to your project or your warehouse.
If your location is not on this map yet, even better: we would love to work with you and reach one more part of the globe.
- New York City and Sag Harbor, USA
- Miami, USA
- Madrid, Spain
- Tenerife, Spain
- Kuwait City, Kuwait
- Manama, Bahrain
- Riyadh, Saudi Arabia
- Dubai, UAE
- Mumbai, India
- Hong Kong SAR, China
- Jakarta, Indonesia
- Bali and Lombok, Indonesia
- Seattle, USA
- Portland, USA
- San Francisco, USA
- Los Angeles, USA
- Scottsdale, USA
- Salt Lake City, USA
- Bozeman, USA
- Denver, USA
- Minneapolis, USA
- Houston, USA
- New Orleans, USA
- Chicago, USA
- Nashville, USA
- Atlanta, USA
- Raleigh, USA
- Washington DC, USA
- Honolulu, USA
- Guam, USA
Indoors and out, one supplier for the whole project.
From the terrace to the last guest room, in one quote, one container and one person answering the phone. Furniture, lighting, planters and the carved and woven panels that finish a wall, built in the same workshops to the same spec.
Restaurants and bars
Dining chairs and bar stools, banquettes, tables in teak, stone or terrazzo, service stations and screens.
Guest rooms
Beds and headboards, wardrobes and desks, nightstands, luggage racks and mirrors, repeated to a consistent spec across every key.
Pool, terrace and garden
Sun loungers, daybeds and canopies, outdoor dining sets, planters and lanterns, all specified for weather rather than for a showroom.
Lobby and public areas
Lounge seating, reception and concierge desks, coffee tables, room dividers, lighting and the woven and carved panels that dress a wall.
If it belongs in the property, we can make it. Tell us what the project needs.
Hold the materials.
A piece of our workshop, in your office. Teak finishes, hand carved panels, full grain leather, woven fibre, rattan, brass, stone and macramé.
Wood
Saddle
Sustainably managed teak, chosen trunk by trunk. The finish either protects the natural tone or deepens it.
WD-01
Leather
Walnut brown
Full grain cow and goat, uncorrected. Healed scars and grazing marks stay where the hide made them.
LT-02
Rattan
Open weave
Bends instead of breaking, woven dry. Peeled, sanded and drawn tight by hand, and it holds its shape for decades.
RT-02
Marble
Verde green
Quarried and honed rather than polished to a shine, so the veining reads as stone under the hand as well as the eye.
LM-VG
Carving
Scale Carve Noir
Carving is subtraction: the surface is cut away stroke by stroke, every groove set by hand, so no two panels repeat.
CV-01
Natural fibre
Pandan weave
Agel, sisal, pandanus and water hyacinth, woven by hand. Nothing milled to a spec, so each keeps its own colour and give.
Brass
Hammered brass
Solid brass and copper, warm in tone and in weight, deepening into a natural patina.
BR-02
Textile
Slate Blue
Upholstery chosen for hand feel as much as colour, rated for contract-grade daily use.
FB-05
Wood
Madu
Sustainably managed teak, chosen trunk by trunk. The finish either protects the natural tone or deepens it.
WD-05
Macramé
Macramé weave 1
Knots only, no weave and no stitch. Tension and repetition hold the shape, so every panel breathes differently.
MV-01
Stone
Lavastone grey
Cast from natural aggregate, dense and cool, carrying the texture of the quarry rather than something poured smooth.
LG-R
Leather
Forest green
Full grain cow and goat, uncorrected. Healed scars and grazing marks stay where the hide made them.
LT-08
Marble
Crema
Quarried and honed rather than polished to a shine, so the veining reads as stone under the hand as well as the eye.
LM-C
Natural fibre
Mendong weave
Agel, sisal, pandanus and water hyacinth, woven by hand. Nothing milled to a spec, so each keeps its own colour and give.
Wood
Espresso
Sustainably managed teak, chosen trunk by trunk. The finish either protects the natural tone or deepens it.
WD-08
Copper
Hammered copper
Solid brass and copper, warm in tone and in weight, deepening into a natural patina.
CR-02
Macramé
Cord, deep terracotta
Knots only, no weave and no stitch. Tension and repetition hold the shape, so every panel breathes differently.
Rattan
Radio weave, 2mm
Bends instead of breaking, woven dry. Peeled, sanded and drawn tight by hand, and it holds its shape for decades.
RT-01
Marble
Javarosso
Quarried and honed rather than polished to a shine, so the veining reads as stone under the hand as well as the eye.
LM-JR
Leather
Black
Full grain cow and goat, uncorrected. Healed scars and grazing marks stay where the hide made them.
LT-01
Brass
Patina carved brass
Solid brass and copper, warm in tone and in weight, deepening into a natural patina.
BR-04
Natural fibre
Sisal weave
Agel, sisal, pandanus and water hyacinth, woven by hand. Nothing milled to a spec, so each keeps its own colour and give.
NF-04
Carving
Hammered Carver Tanah
Carving is subtraction: the surface is cut away stroke by stroke, every groove set by hand, so no two panels repeat.
CV-05
Textile
Ivory Fleck
Upholstery chosen for hand feel as much as colour, rated for contract-grade daily use.
FB-07
Wood
Tobacco
Sustainably managed teak, chosen trunk by trunk. The finish either protects the natural tone or deepens it.
WD-04
Carving
Scale Carve Abu
Carving is subtraction: the surface is cut away stroke by stroke, every groove set by hand, so no two panels repeat.
CV-02
Carving
Fluted Deep Amber
Carving is subtraction: the surface is cut away stroke by stroke, every groove set by hand, so no two panels repeat.
AC-02
Leather
Cognac
Full grain cow and goat, uncorrected. Healed scars and grazing marks stay where the hide made them.
Leather
Ivory
Full grain cow and goat, uncorrected. Healed scars and grazing marks stay where the hide made them.
Textile
Cream Nub
Upholstery chosen for hand feel as much as colour, rated for contract-grade daily use.
FB-10
Textile
Dusty Rose Nub
Upholstery chosen for hand feel as much as colour, rated for contract-grade daily use.
FB-15
Natural fibre
Herringbone abaca
Agel, sisal, pandanus and water hyacinth, woven by hand. Nothing milled to a spec, so each keeps its own colour and give.
Copper
Ribbed copper
Solid brass and copper, warm in tone and in weight, deepening into a natural patina.
Stone
Travertine, golden
Quarried and honed rather than polished to a shine, so the veining reads as stone under the hand as well as the eye.
Marble
Marble, brown
Quarried and honed rather than polished to a shine, so the veining reads as stone under the hand as well as the eye.
Macramé
Cord, taupe
Knots only, no weave and no stitch. Tension and repetition hold the shape, so every panel breathes differently.
Capability
Built to survive dinner service.
Indoor and outdoor, across the whole FF&E list. Hospitality furniture takes daily abuse, so we build with mortise and tenon joinery, solid sections rather than veneer over board, and finishes specified for commercial cleaning.
Swipe for more views
How a project runs.
Days are counted from the day your enquiry lands, so you can put real dates against them. Enquiry to delivered furniture runs about four to five months, of which roughly one is at sea and in customs.
Day 0
Send us what you have
A BOQ, a drawing set, or a photo off your phone.
Day 4 to 7
We quote
Itemised and factory direct, with anything we would build differently flagged. We ask questions where we need to, so what we quote is what you actually want.
Day 14 to 21
Prototype
We build one and photograph it from every side. Nothing goes into production until you have signed it off.
Day 70 to 90
Built and shipped
Made in our workshops, photographed piece by piece, packed and loaded.
+2 to 5 weeks
Landed and delivered
Sea freight, then import. Your agent handles the paperwork and we hand over everything they need. To your door in the UAE and the United States, from the port everywhere else.
Featured projects
Livare Villa
Bali, Indonesia
Tropical architecture and curated interiors. Bold angles and straight lines frame natural timber, with every piece positioned so that light, shadow and negative space are part of the composition rather than an afterthought.
Bespoke contract furniture and interior elements
See all projects
Mana Sanctuary
Bali, Indonesia
A ten room boutique retreat, built as a place to pause. The luxury room is deliberately sensorial and moody, so guests feel grounded and present.
Bespoke contract furniture and interior elements
See all projects
Rumah Buaya
Bali, Indonesia
A residence that is bold and intimate at once, designed around gathering. Luxurious finishes layered with warmth, so the house reads as striking and genuinely inviting.
Bespoke contract furniture and interior elements
See all projects
Total supply line control.
Committing to a container from overseas is a real leap. We work at closing that distance, through communication and through standards, until buying this way stops being the thing you worry about. Here is what you can check before you send us anything.
Vertically integrated
Solid teak and natural materials come out of our own workshops, under our brand Origo. The rest we source and manage ourselves, so one company still answers for the whole order.
Talk to a client
Brunch & Cake across Dubai, Riyadh, Bahrain and Kuwait, over multiple container shipments. Ask and we will put you in touch with someone who has run a project through us.
You watch it being made
A project tracker you can log into, updates as the work moves, and photographs of every piece before it is packed. Nothing ships until you are happy with it.
Checks before you commit
Payment terms, trade references and factory photographs, on request.
Send us what you have.
A BOQ, a drawing set, or a photo off your phone. We come back with questions, then a quote. If you would rather hold the materials first, request the sample box.
Part loads, staged shipments, several sites: tell us what you need.